.

was doing new lower control arms and everything was going well, last thing i needed to just tighten the pinch bolt for the lower ball joint.

. .

Insert the stud of the new ball joint through the tapered hole of the knuckle and install either self-locking nut (self-locking nuts must always be replaced) or the slotted nut (also known as a castle nut) as supplied.

The upper control arm on this vehicle is much simpler.

i know theyre metric, but i dont know exactly how the thread sizes and shit work,. Signs your Silverado may need replacement ball joints include excessive vibration from. The ball joint on your Silverado is made up of three pieces a ball with a threaded stud, a rubber boot, and a socket, which allows the front suspension to move at different angles while steering or going over uneven roads.

PRICE 8.

. This joint locates. Quantity 1.

Notes Front Upper. .

.

.

. In this how-to video I show you How to Remove Lower Ball Joints using a Ball Joint Press Tool.

The upper control arm on this vehicle is much simpler. .

Delphi&174; Front Bolt-On Ball Joint.
Be sure that the lower ball joint is installed all the way before installing and torqueing the pinch bolt.
.

Dave&39;s insider tips will help you line up the steering knuckle on the ball joint.

.

TIA. httpswww. .

Control arms allow wheels to move up and down while preventing forward and rearward movement. Dave&39;s insider tips will help you line up the steering knuckle on the ball joint. lbs. . Advance Auto Parts has 32 different Lower Control Arm & Ball Joint for your vehicle, ready for shipping or in-store pick up.

When installing the steering knuckle, take care to make sure it is centered with the recessed area of the ball joint.

Front Lower Ball Joint Pinch Bolt Torque Spec 37 ft-lbs 30&176; Front Lower Control Arm Frame Bolts Torque Spec 37 ft-lbs 90&176; Front Strut and Extra Knuckle Torques; Front. .

This clamps around the ball joint's stud.

.

Driver side.

.

Dorman Suspension Control Arm Bolt 14883.